Variation of the shear strength of rock joints due to cyclic loadings is studied in the present paper. Identical joint surfaces were prepared using a developed moulding method with special mortar and shear tests were performed on these samples under both static and cyclic loading conditions. Differe
Fatigue behavior of an epoxy polymer subjected to cyclic shear loading
β Scribed by Gang Tao; Zihui Xia
- Publisher
- Elsevier Science
- Year
- 2008
- Tongue
- English
- Weight
- 441 KB
- Volume
- 486
- Category
- Article
- ISSN
- 0921-5093
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
Liquefaction induced damage to the built environment is one of the major causes of damage in an earthquake. Since Niigata earthquake in 1964, it has been popularly recognized that the liquefaction induced ground failures caused severe damage in various forms such as sand boiling, ground settlement,
Biaxial fatigue behavior of an epoxy polymer was investigated under cyclic shear and proportional axialshear combined loadings with mean strains. Axial and shear strains were simultaneously measured by a non-contact real-time strain measurement system during fatigue process. Then the mechanical para
In this study the fatigue characteristics of quasi-isotropic carbon fiber reinforced plastics laminates subjected to variable amplitude cyclic two-stage loading were investigated. The cumulative damage was evaluated by considering residual strength as a parameter since the Linear Cumulative Damage r