𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Fatigue behavior and life prediction of carbon fiber reinforced concrete under cyclic flexural loading

✍ Scribed by Wei Wang; Sigang Wu; Hongzhe Dai


Publisher
Elsevier Science
Year
2006
Tongue
English
Weight
306 KB
Volume
434
Category
Article
ISSN
0921-5093

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Fatigue life prediction of fiber reinfor
✍ Jun Zhang; Henrik Stang; Victor C. Li πŸ“‚ Article πŸ“… 1999 πŸ› Elsevier Science 🌐 English βš– 883 KB

This paper presents a semi-analytical method to predict fatigue behavior in flexure of fiber reinforced concrete (FRC) based on the equilibrium of force in the critical cracked section. The model relies on the cyclic bridging law, the so-called stress-crack width relationship under cyclic tensile lo

Flexural behavior of reinforced concrete
✍ Hee Sun Kim; Yeong Soo Shin πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier Science 🌐 English βš– 853 KB

This paper reports experimental studies of reinforced concrete (RC) beams retrofitted with new hybrid fiber reinforced polymer (FRP) system consisting carbon FRP (CFRP) and glass FRP (GFRP). The objective of this study is to examine effect of hybrid FRPs on structural behavior of retrofitted RC beam

Cyclic fatigue behavior of carbon fiber
✍ N. Himmel; C. Bach πŸ“‚ Article πŸ“… 2006 πŸ› Elsevier Science 🌐 English βš– 718 KB

The mechanical behavior of [0Β°] 8 unidirectional, [+45Β°/0Β°/Γ€45Β°/90Β°] S quasi-isotropic and [+45Β°/Γ€45Β°] 3S angle-ply laminates produced by pressure or vacuum assisted resin infusion from toughened vinylester resin systems with unidirectional carbon fiber fabric reinforcement was investigated. The stu

Prediction of low-cycle contact fatigue
✍ Yi-Ming Jen; Ming-Chuen Yip; Cheng-Long Wei; Guo-Ching Shu πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 732 KB

This study experimentally analyzes the contact fatigue life of the sleeve-pin-shaft connection specimens under cyclic axial and pure torsional loading. Based on the stress/strain results along the pin-hole edge of the shaft obtained using the finite element method, four stress-based and three strain