𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Fatigue and tensile properties of a newly developed tin-copper alloy

✍ Scribed by M. T. Jahn; A. R. Saavedra

Publisher
Springer
Year
1992
Tongue
English
Weight
518 KB
Volume
11
Category
Article
ISSN
0261-8028

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Microstructure and properties of titaniu
Microstructure and properties of titanium alloy produced in the newly developed blended elemental powder metallurgy process
✍ Takahiro Fujita; Atsushi Ogawa; Chiaki Ouchi; Hidenori Tajima πŸ“‚ Article πŸ“… 1996 πŸ› Elsevier Science 🌐 English βš– 577 KB

A blended elemental titanium powder metallurgy process has been developed to offer low cost commercial products. The process employs hydride-dehydride (HDH) powders as well as Hunter sponge fines (SP) as raw materials. Mechanical properties of HDH products are comparable with those of SP products. A

The tensile properties and high cyclic f
The tensile properties and high cyclic fatigue characteristics of Mg–5Li–3Al–1.5Zn-2RE alloy
✍ Tingqu Li; Yongbing Liu; Zhanyi Cao; Dongmei Jiang; Liren Cheng πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science 🌐 English βš– 892 KB

The tensile and fatigue properties of the Mg-5Li-3Al-1.5Zn-2RE (LAZ531-2RE) alloy were presented. The alloy was prepared by hot extrusion after vacuum casting. The Portevin-Le Chatelier (PLC) phenomenon was observed during tensile deformation. The PLC effect was attributed to the dynamic interaction

Investigation of wear resistance and mic
Investigation of wear resistance and microstructure of a newly developed chromium and vanadium containing iron-based hardfacing alloy
✍ U. Reisgen; U. Dilthey; B. Balashov; S. Kondapalli; C. Geffers πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 277 KB

## Abstract Plasma transferred arc (PTA) welded Ni and Co‐based alloys have gained high acceptance in many industrial applications for the wear protection of components. Recently, the cost of nickel and cobalt is rising drastically. This paper presents the development of a cost‐effective high chrom