Fast 3D imaging using variable-density spiral trajectories with applications to limb perfusion

✍ Scribed by Jin Hyung Lee; Brian A. Hargreaves; Bob S. Hu; Dwight G. Nishimura

• Publisher: John Wiley and Sons
• Year: 2003
• Tongue: English
• Weight: 792 KB
• Volume: 50
• Category: Article
• ISSN: 0740-3194
• DOI: 10.1002/mrm.10644

✦ Synopsis

Abstract

Variable‐density k‐space sampling using a stack‐of‐spirals trajectory is proposed for ultra fast 3D imaging. Since most of the energy of an image is concentrated near the k‐space origin, a variable‐density k‐space sampling method can be used to reduce the sampling density in the outer portion of k‐space. This significantly reduces scan time while introducing only minor aliasing artifacts from the low‐energy, high‐spatial‐frequency components. A stack‐of‐spirals trajectory allows control over the density variations in both the k~x~–k~y~ plane and the k~z~ direction while fast k‐space coverage is provided by spiral trajectories in the k~x~–k~y~ plane. A variable‐density stack‐of‐spirals trajectory consists of variable‐density spirals in each k~x~–k~y~ plane that are located in varying density in the k~z~ direction. Phantom experiments demonstrate that reasonable image quality is preserved with approximately half the scan time. This technique was then applied to first‐pass perfusion imaging of the lower extremities which demands very rapid volume coverage. Using a variable‐density stack‐of‐spirals trajectory, 3D images were acquired at a temporal resolution of 2.8 sec over a large volume with a 2.5 × 2.5 × 8 mm^3^ spatial resolution. These images were used to resolve the time‐course of muscle intensity following contrast injection. Magn Reson Med 50:1276–1285, 2003. © 2003 Wiley‐Liss, Inc.