𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Factors governing the formation and persistence of layers in a subalpine snowpack

✍ Scribed by David Gustafsson; Peter A. Waldner; Manfred Stähli


Publisher
John Wiley and Sons
Year
2004
Tongue
English
Weight
327 KB
Volume
18
Category
Article
ISSN
0885-6087

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

The layered structure of a snowpack has a great effect on several important physical processes, such as water movement, reflection of solar radiation or avalanche release. Our aim was to investigate what factors are most important with respect to the formation and persistence of distinct layers in a subalpine environment. We used a physically based numerical one‐dimensional model to simulate the development of a snowpack on a subalpine meadow in central Switzerland during one winter season (1998–99). A thorough model validation was based on extensive measurement data including meteorological and snow physical parameters. The model simulated the snow water equivalent and the depth of the snowpack as well as the energy balance accurately. The observed strong layering of the snowpack, however, was not reproduced satisfactorily. In a sensitivity analysis, we tested different model options and parameter settings significant for the formation of snow layers. The neglection of effects of snow microstructure on the compaction rate, and the current description of the water redistribution inside the snowpack, which disregard capillary barrier effects, preferential flow and lateral water flow, were the major limitations for a more realistic simulation of the snowpack layering. Copyright © 2004 John Wiley & Sons, Ltd.


📜 SIMILAR VOLUMES


The factor time at the formation and dev
✍ M. Bierwirth; J. Goellner; A. Heyn; M. Winkelmans 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 German ⚖ 206 KB

## Abstract Passive layers on high alloyed chromium nickel steels protect the metal from corrosion. The protective effect of the passive layer, however, does not immediately exist after the final surface treatment. Some time is necessary to form the protective layer. The exposure conditions are als