✦ LIBER ✦

Factors affecting the energy efficiency of single screw extruders

✍ Scribed by Sang Yong Kim; S.P. Hersh; P.L. Grady

Book ID: 115933543
Publisher: Elsevier Science
Year: 1982
Weight: 811 KB
Volume: 17
Category: Article
ISSN: 0015-0568
DOI: 10.1016/0015-0568(82)90060-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Evaluating Energy Consumption and Effici

Evaluating Energy Consumption and Efficiency of a Twin-Screw Extruder

✍ M. Liang; H.E. Huff; F.-H. Hsieh 📂 Article 📅 2002 🏛 Institute of Food Technologists 🌐 English ⚖ 554 KB

Basis for the design of single-screw dev

Basis for the design of single-screw devolatilizing extruders

✍ Prof. Dr.-Eng. H. Potente 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 English ⚖ 358 KB

The torque in the metering zone of singl

The torque in the metering zone of single screw extruders

✍ G. Mennig 📂 Article 📅 1987 🏛 Society for Plastic Engineers 🌐 English ⚖ 462 KB

Investigation of the flow of molten poly

Investigation of the flow of molten polymer in single-screw extruders

✍ V. G. Zverlin; V. M. Goncharenko; E. P. Barmashin 📂 Article 📅 1984 🏛 Springer 🌐 English ⚖ 345 KB

Screw extrusion of thermoplastics: II. S

Screw extrusion of thermoplastics: II. Simulation of feeding zone of the single screw extruder

✍ I. O. Mikulionok; L. B. Radchenko 📂 Article 📅 2012 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 755 KB

The distribution of number of passes ove

The distribution of number of passes over the flights in single screw melt extruders

✍ I. Manas-Zloczower; Z. Tadmor 📂 Article 📅 1983 🏛 John Wiley and Sons 🌐 English ⚖ 460 KB 👁 2 views

## Abstract In single screw melt extruders there is a continuous flow of polymer melt over the flight clearance. The melt flowing over the clearance experiences high shear rate and may also experience very high temperature. This, in turn, may affect polymer structure and properties. The melt that f