✦ LIBER ✦

Fabrication of Ti–Al Micro/ Nanometer-Sized Porous Alloys through the Kirkendall Effect

✍ Scribed by Y. H. He; Y. Jiang; N. P. Xu; J. Zou; B. Y. Huang; C. T. Liu; P. K. Liaw

Book ID: 101418762
Publisher: John Wiley and Sons
Year: 2007
Tongue: English
Weight: 452 KB
Volume: 19
Category: Article
ISSN: 0935-9648
DOI: 10.1002/adma.200602398

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effects of the Al content on pore struct

Effects of the Al content on pore structures of porous Ti–Al alloys

✍ Y. Jiang; Y.H. He; N.P. Xu; J. Zou; B.Y. Huang; C.T. Liu 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 611 KB

Effect of the number and size of γ'-part

Effect of the number and size of γ'-particles on the long-term strength of Ni−Cr−Al−Ti alloys

✍ Yu. G. Sorokina; S. A. Yuganova 📂 Article 📅 1968 🏛 Springer US 🌐 English ⚖ 123 KB

Effects of addition of rare earth elemen

Effects of addition of rare earth element Gd on the lamellar grain sizes of a binary Ti-44Al alloy

✍ K Xia; W Li; C Liu 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 400 KB

Effect of nonuniform size distribution o

Effect of nonuniform size distribution of submicrocrystalline structure elements on the mechanical properties of an alloy Ti-6Al-4V

✍ I. V. Ratochka; O. N. Lykova; Yu. R. Kolobov; A. Yu. Manzhula 📂 Article 📅 2008 🏛 Springer 🌐 English ⚖ 811 KB

The effect of atomic size on the stabili

The effect of atomic size on the stability of supercooled liquid for amorphous (Ti, Zr, Hf)65Ni25Al10 and (Ti, Zr, Hf)65Cu25Al10 alloys

✍ Tao Zhang; Akihisa Inoue; Tsuyoshi Masumoto 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 354 KB

Stabilization Effect of Zr and Ti Additi

Stabilization Effect of Zr and Ti Additions on the Ageing Characteristics of Al-1 wt% Si Alloy Through a Creep Study

✍ Dr. G. H. Deaf; M. H. N. Beshai; A. M. Abd El Khalek; Prof. Dr. G. Graiss; Prof. 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 446 KB 👁 1 views

Si-0.1 wt% Zr-0.1 wt% Ti alloys were used to trace the effect of Zr and Ti additions on the behaviour of the steady state creep. After solid solution treatment specimens of both alloys were aged at 623, 673, 723 and 773 K and creep tests were performed at room temperature by applying stresses of 60.