✦ LIBER ✦

Fabrication of alumina green body through gelcasting process using alginate

✍ Scribed by Yu Jia; Yoshinori Kanno; Zhi-Peng Xie

Book ID: 117357449
Publisher: Elsevier Science
Year: 2003
Tongue: English
Weight: 238 KB
Volume: 57
Category: Article
ISSN: 0167-577X
DOI: 10.1016/s0167-577x(02)01306-x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fabrication of porous alumina green bodi

Fabrication of porous alumina green bodies from suspension emulsions by gelcasting

✍ Bo Yuan; Haibo Wu; Xiaofei Sun; Gang Wang; Hongxia Li 📂 Article 📅 2012 🏛 Elsevier Science 🌐 English ⚖ 935 KB

Fabrication of green and sintered bodies

Fabrication of green and sintered bodies prepared by centrifugal compaction process using wet-jet milled slurries

✍ Katsuya Sato; Yuji Hotta; Huseyin Yilmaz; Koji Watari 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 585 KB

Properties of green and sintered bodies prepared by high-speed centrifugal compaction process (HCP) using wet-jet milled slurries were investigated. At 30 vol.% solids loading, the relative packing density of compacted body prepared from wet-jet milled slurry was 67%. On the other hand, the density

Fabrication of stable Al2O3 slurries and

Fabrication of stable Al2O3 slurries and dense green bodies using soft-energy milling process

✍ Y. Hotta; K. Tsunekawa; T. Shirai; K. Sato; M. Yasuoka; K. Watari 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 812 KB

Wet-jet milling and planetary homogenizing processes as soft-energy milling methods were employed as a novel method to prepare stable Al 2 O 3 slurries. The viscosity of slurries prepared from the soft-energy milling was constant and stable for long time, as compared to ball-milled slurries. Though