𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Fabrication of Al2O3/SiC Composite Microcomponents using Non-aqueous Suspension

✍ Scribed by Hany Hassanin; Kyle Jiang

Publisher
John Wiley and Sons
Year
2009
Tongue
English
Weight
354 KB
Volume
11
Category
Article
ISSN
1438-1656

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Fabrication of Al2O3-coated carbon fiber
Fabrication of Al2O3-coated carbon fiber-reinforced Al-matrix composites
✍ Qingbing Zeng πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 307 KB πŸ‘ 2 views

Fine Al 2 O 3 coating could be obtained from alumina sols modified by chelator acetylaceton, under exact control of the parameters. Al 2 O 3 coating by the sol-gel method on the carbon-fiber (CF) surface was investigated in detail to improve the oxidation resistance of CFs. Further study focused on

Interface Controlled Materials (RUEHLE:I
Interface Controlled Materials (RUEHLE:INTERFACE CONT.MAT O-BK) || Development of Al 2 O 3 -ZrO 2 Nanostructured Composites Using Pulsed Power Technologies
✍ Rühle, M.; Gleiter, H. πŸ“‚ Article πŸ“… 2005 πŸ› Wiley-VCH Verlag GmbH & Co. KGaA βš– 134 KB πŸ‘ 2 views

Fully dense Al 2 O 3 -ZrO 2 nanostructured composites were fabricated by a pulsed magnetic compaction and conventional sintering of the nano-sized powders. Two different approaches have been applied for production of the composite powders. Powders of the first group were prepared by mixing in the is