✦ LIBER ✦

Fabrication and tensile properties of rapidly solidified Cu-10wt.%Ni alloy

✍ Scribed by Daniel Baril; Roch Angers; Jocelyn Baril

Book ID: 108026712
Publisher: Elsevier Science
Year: 1992
Tongue: English
Weight: 494 KB
Volume: 158
Category: Article
ISSN: 0921-5093
DOI: 10.1016/0921-5093(92)90129-o

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Crystallinity of rapidly solidified TiN

Crystallinity of rapidly solidified TiNiCu alloy

✍ Minoru Matsumoto; Daisuke Shindo; Yasubumi Furuya; Kiyoshi Aoki; Tsuyoshi Masumo 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 240 KB

Mechanical properties of a rapidly solid

Mechanical properties of a rapidly solidified AlSiNiMn alloy

✍ I. Johansen; H.J. Roven 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 663 KB

Hot extrusion and mechanical properties

Hot extrusion and mechanical properties of rapidly solidified Al and Cu alloy powders

✍ J. Liu; U. Backmark; L. Arnberg; N. Bäckström; O. Grinder; S. Savage 📂 Article 📅 1988 🏛 Elsevier Science ⚖ 322 KB

Differences in the glass-forming ability

Differences in the glass-forming ability of rapidly solidified and mechanically alloyed Ti-Ni-Cu alloys

✍ B.S. Murty; M. Mohan Rao; S. Ranganathan 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 410 KB

Melt spinning of TisoNiso\_~ Cu x (x = 10, 25, 40) alloys showed that the glass-forming ability is good for Cu-rich compositions and poor for Ni-rich compositions. The results of mechanical alloying experiments in the same system showed a reverse trend as far as the glass-forming ability is concerne

Microstructures and mechanical propertie

Microstructures and mechanical properties of rapidly solidified high strength Al–Ni based alloys

✍ J.Q Guo; K Ohtera 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 907 KB

Microstructure characterization and stab

Microstructure characterization and stability of rapidly solidified NiAu and RhCu alloys

✍ L. Irons; S. Mini; W.E. Brower Jr. 📂 Article 📅 1988 🏛 Elsevier Science ⚖ 400 KB