𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Fabrication and evaluation of flat thick film type solid oxide fuel cell

✍ Scribed by Toshihiko Setoguchi; Takanori Inoue; Hiromichi Takebe; Koichi Eguchi; Kenji Morinaga; Hiromichi Arai

Publisher
Elsevier Science
Year
1990
Tongue
English
Weight
301 KB
Volume
37
Category
Article
ISSN
0167-2738

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Fabrication and performance evaluation o
Fabrication and performance evaluation of planar solid oxide fuel cell with large active reaction area
✍ Jie Wang; Dong Yan; Jian Pu; Bo Chi; Li Jian πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier Science 🌐 English βš– 746 KB

High performance a b s t r a c t Anode-supported planar solid oxide fuel cells (SOFCs) with dimension from 5 Γ‚ 5 cm 2 to 15 Γ‚ 15 cm 2 have been successfully fabricated by tape casting, screen-printing and singlestep co-firing technologies, which shows a potential way of cost-effective for mass produ

Performance Evaluation of Solid Oxide Fu
Performance Evaluation of Solid Oxide Fuel Cells with Thin Film Electrolyte Fabricated by Binder-Assisted Slurry Casting
✍ W. M. Guo; Y. F. Xiao; X. M. Liu; Y. Chen; L. J. Li πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 374 KB

A gas-tight yttria-stabilized zirconia (YSZ) electrolyte film was fabricated on porous NiOΒ±YSZ anode substrates by a binder-assisted slurry casting technique. The scanning electron microscope (SEM) results showed that the YSZ film was relatively dense with a thickness of 10 lm. La 0.8 Sr 0.2 MnO 3 (