Fabrication and characterization of optical plastic rods in the presence of dicumyl peroxide

✍ Scribed by Jui-Hsiang Liu; Hung-Tsai Liu; Jiunn-Lang Chen

• Publisher: John Wiley and Sons
• Year: 1999
• Tongue: English
• Weight: 84 KB
• Volume: 200
• Category: Article
• ISSN: 1022-1352
• DOI: 10.1002/(sici)1521-3935(19990501)200:5<1107::aid-macp1107>3.0.co;2-c

✦ Synopsis

The swollen-gel copolymerization of methyl methacrylate (MMA) with benzyl methacrylate (BzMA) was carried out in a poly(methyl methacrylate) tube in the presence of dicumyl peroxide (DCPO). The diffusion of the higher-refractive-index monomer BzMA into the swollen gel leads to the formation of a refractive index gradient (GRIN). After complete polymerization, a symmetric and bubble-free GRIN optical rod was obtained. It was found that high initiator concentrations cause a great shrinkage during polymerization and lead to the formation of bubbles. A long swelling process (t A 24 h) will cause the deformation of the cylindrical shape of the PMMA tube. The influence of initiator concentration, swelling temperature, swelling time, and polymerization temperature on the optical characteristics of the GRIN rods was investigated. An image with no distortion is observed through the GRIN rods prepared in this investigation. Resolution of 50 lm parallel lines transmitted through the GRIN rod was also examined.