✦ LIBER ✦

Extremely high corrosion resistance of chromium-containing amorphous iron alloys

✍ Scribed by K. Hashimoto; T. Masumoto

Publisher: Elsevier Science
Year: 1976
Weight: 250 KB
Volume: 23
Category: Article
ISSN: 0025-5416
DOI: 10.1016/0025-5416(76)90210-x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

High Temperature Cyclic Oxidation Resist

High Temperature Cyclic Oxidation Resistance of Iron Chromium Base Alloys

✍ V. F. C. Lins; M. M. R. Castro; R. Z. Domingues; T. Matencio 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 477 KB 👁 1 views

## Abstract The cyclic oxidation behavior of an experimental stainless ferritic steel, without molybdenum and with copper‐aluminum‐titanium‐lanthanum additions, developed for solid oxide fuel cell applications, was evaluated and compared with the oxidation behavior of commercial austenitic and ferr

Pitting, Crevice and stress corrosion re

Pitting, Crevice and stress corrosion resistance of high chromium und molybdenum alloy stainless steels

✍ Dr. M. B. Rockel; Dipl.-Ing. M. Renner 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 German ⚖ 405 KB 👁 1 views

## Abstract This paper presents new data on the resistance of recently developed high‐alloy stainless steels to localised corrosion in chloride solutions. Pitting potential was determined in artificial sea water, and critical pitting temperature CPT in very aggressive FeCl~3~ solution. Critical cre

High field magnetization and magneto-res

High field magnetization and magneto-resistance of amorphous alloys containing rare earth atoms

✍ R. Ferrer; R. Harris; D. Zobin; M.J. Zuckermann 📂 Article 📅 1978 🏛 Elsevier Science 🌐 English ⚖ 284 KB

Investigation of wear resistance and mic

Investigation of wear resistance and microstructure of a newly developed chromium and vanadium containing iron-based hardfacing alloy

✍ U. Reisgen; U. Dilthey; B. Balashov; S. Kondapalli; C. Geffers 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 277 KB

## Abstract Plasma transferred arc (PTA) welded Ni and Co‐based alloys have gained high acceptance in many industrial applications for the wear protection of components. Recently, the cost of nickel and cobalt is rising drastically. This paper presents the development of a cost‐effective high chrom

ASTM standards on iron-chromium, iron-ch

ASTM standards on iron-chromium, iron-chromium-nickel and related alloys. Corrosion- and Erosion-Resisting Alloys and Alloys for High-Temperature Service. 1965 American Society for Testing and Materials, Philadelphia. 617 Seiten, zahlr. Abb. und Tab. Preis $ 8,50, Mitglieder $ 5,95

📂 Article 📅 1966 🏛 John Wiley and Sons 🌐 German ⚖ 149 KB