๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Experimental techniques for thermal contact resistance measurements

โœ Scribed by L.S. Fletcher

Publisher
Elsevier Science
Year
1993
Tongue
English
Weight
109 KB
Volume
7
Category
Article
ISSN
0894-1777

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Method for measuring contact resistivity
Method for measuring contact resistivity
โœ M. Swart; F.D. Auret ๐Ÿ“‚ Article ๐Ÿ“… 1992 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 292 KB

It is well known that high contact resistivity is detrimental to the performance of solar cells. Cadmium telluride (CdTe), frequently used for solar cells, have low doping levels which results in high contact resistivities and, consequently, in poor ohmic contacts. Most of the methods in use for mea

Thermal contact resistance in injection
Thermal contact resistance in injection molding
โœ Chi J. Yu; J. E. Sunderland; C. Poli ๐Ÿ“‚ Article ๐Ÿ“… 1990 ๐Ÿ› Society for Plastic Engineers ๐ŸŒ English โš– 550 KB

## Abstract This paper describes a method for obtaining the thermal contact resistance (TCR) between an injection molded part and its mold. Due to the absence of TCR the simulated cooling times obtained from Polycool II, a computer aided engineering (CAE) package for cooling simulation of injection

Novel PEM fuel cell for in situ contact
Novel PEM fuel cell for in situ contact resistance measurements
๐Ÿ“‚ Article ๐Ÿ“… 2001 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 124 KB

An experimental DMFC, designed and manufactured in-house, was used in this study. Three graphite anode plates were machined with the same flow channel configuration, but different channel depths. By comparing the RHE polarization with the methanol-oxygen polarization experiments, polarization losses