The main objective of the present study is to investigate the performance characteristics of a solar-assisted ground-source heat pump system (SAGSHPS) for greenhouse heating with a 50 m vertical 1 1 4 in nominal diameter U-bend ground heat exchanger. This system was designed and installed in the Sol
Experimental study of heat transfer of buried finned pipe for ground source heat pump applications
โ Scribed by Ahmet Koyun; Hakan Demir; Zakir Torun
- Publisher
- Elsevier Science
- Year
- 2009
- Tongue
- English
- Weight
- 546 KB
- Volume
- 36
- Category
- Article
- ISSN
- 0735-1933
No coin nor oath required. For personal study only.
โฆ Synopsis
Ground source heat pump Buried pipe
Ground heat exchangers have vital importance for ground source heat pump applications. Various configurations tried to improve heat transfer in the soil. A new kind of aluminium finned pipe buried in the soil for this aim. In order to compare effectiveness of the Al finned pipe over the traditional PPRC pipe an experimental study carried out. The experimental GSHP system was installed at Yฤฑldฤฑz Technical University Davupasa Campus on 800 m 2 surface area with no special surface cover. Temperature data were collected using thermocouples buried in soil horizontally and vertically at various distances from the pipe center and at the inlet and the outlet of the ground heat exchanger. Experimental results were compared with results from analytical study. To compare effectiveness of the Al finned pipe and PPRC pipe a new parameter defined as transferred amount of heat per unit mass of working fluid per unit time for this aim. It is found that Al finned pipe has higher heat transfer values than the traditional PPRC pipe.
๐ SIMILAR VOLUMES
hettct-design, and greater fire resistance than previrms modules, and it promises to help accelerale the use of PV module\ in residential application\. ## 03/01444 Optimal cool storage capacity for load management Ashok. S. and
A new heat transfer enhanced tube\*the inside and outside spirally triangle "nned tube with small spiral angles (IOSTF tube)\*was developed and manufactured for improving the performance of high-pressure preheaters. The triangle #utes with small spiral angle on the outside surface of the IOSTF tube