Experimental results of a sensible heat storage system for residential and light commercial application

✍ Scribed by Alex H. W. Lee; Jerold W. Jones

• Publisher: John Wiley and Sons
• Year: 1999
• Tongue: English
• Weight: 114 KB
• Volume: 23
• Category: Article
• ISSN: 0363-907X
• DOI: 10.1002/(sici)1099-114x(19990325)23:4<319::aid-er481>3.0.co;2-f

✦ Synopsis

This paper presents the performance results for a sensible heat storage system. The system under study operates as an air source heat pump which stores the compressor heat of rejection as domestic hot water or hot water in a storage tank that can be used as a heat source for providing building heating. Although measurements were made to quantify space cooling, space heating, and domestic water heating, this paper emphasizes the space heating performance of the unit. The heat storage system was tested for different indoor and outdoor conditions to determine parameters such as heating charge rate, compressor power, and coefficient of performance (COP). The thermal storage tank was able to store a full charge of heat. The rate of increase of storage tank temperature increased with outdoor temperature. The heating rate during a charge test, best shown by the normalized rate plots, increased with evaporating temperature due to the increasing mass flow rate and refrigerant density. At higher indoor temperature during the discharge tests, the rate of decrease of storage tank temperature was slower. Also, the discharge heating rate decreased with time since the thermal storage tank temperature decreased as less thermal energy became available for use.