## Abstract Much progress has been made in highβperformance electronic chips, the miniaturization of electronic circuits and other compact systems recently, which brings about a great demand for developing efficient heat removal techniques to accommodate these high heat fluxes. With this objective
Experimental research of boiling heat transfer of smooth and screwed tube
β Scribed by Maode Li; Huier Chen; Lihong Xiong; Xihong Lu
- Publisher
- John Wiley and Sons
- Year
- 2007
- Tongue
- English
- Weight
- 494 KB
- Volume
- 36
- Category
- Article
- ISSN
- 1099-2871
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
In this paper, based on the analog theory of heat transfer research, we performed an analog experiment on boiling heat transfer in smooth tube and screwed tubes. These are widely used in the high pressure generator of lithium bromide absorption refrigeration. From the experimental research, we obtained a series of results on the boiling heat transfer of a single smooth tube and three screwed tubes. The working condition is near the zone of bubble boiling and the overheat wall temperature ranges from 2β7 Β°C, with a fluid medium of pure water and salt water solution. These results agreed well with the known results, and are significant for the practical design and application of a high pressure generator of lithium bromide absorption for refrigeration. Β© 2007 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(2): 74β84, 2007; Published online in Wiley InterScience (www.interscience. wiley.com). DOI 10.1002/htj.20145
π SIMILAR VOLUMES
Experiments were carried out on the flow pattern, heat transfer, and pressure drop of flow boiling of pure CO 2 and CO 2 -oil mixtures in horizontal smooth and micro-fin tubes. The smooth tube is a stainless steel tube with an inner diameter of 3.76 mm. The micro-fin tube is a copper tube with a mea