The crack growth behavior of AL6XN stainless steel was experimentally investigated using round compact tension (CT) specimens. The influences of the R-ratio (the ratio of the minimum load over the maximum applied load in a cycle), the tensile and compressive overloads, and the loading sequence on cr
Experimental investigations on the growth of small fatigue cracks in naval steel
โ Scribed by A. ELMALKI ALAOUI; D. THEVENET; A. ZEGHLOUL
- Book ID
- 109015282
- Publisher
- John Wiley and Sons
- Year
- 2007
- Tongue
- English
- Weight
- 656 KB
- Volume
- 30
- Category
- Article
- ISSN
- 8756-758X
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
A series of fatigue crack growth experiments were conducted using round compact tension specimens of AISI 304L stainless steel under Mode I loading. The influences of the R-ratio (the ratio of the minimum load to the maximum applied load in a cycle), notch size, the tensile and compressive overloads
To better understand the effect of asperity on the crack closure and fatigue crack growth behavior, the load-CMOD relations and crack propagation rate were examined through the addition of artificial wedges into pre-cracks. Experimental results revealed that the unloading phase of the load vs. CMOD