Experimental estimation of friction force in lubricated cutting of steel

✍ Scribed by Anirudhan Pottirayil; Satish V. Kailas; S.K. Biswas

• Publisher: Elsevier Science
• Year: 2010
• Tongue: English
• Weight: 514 KB
• Volume: 269
• Category: Article
• ISSN: 0043-1648
• DOI: 10.1016/j.wear.2010.05.012

✦ Synopsis

Friction force generated in lubricated cutting of steel is experimentally estimated by recording the tangential force experienced by the spherical face of a pin rubbing against a freshly cut surface. The pin and the cutting tool are both submerged in the lubricant and the pin is situated on the cut-track to record the force. The recording shows an instantaneous achievement of a peak in the force curve followed by a decline in time to a steady state value. The peak and not the steady state friction was found to be sensitive to the structure of the hydrocarbon and addition of additive to the oil. The configuration was designed and tested to demonstrate the influence of a reaction film which develops during cutting, on cutting tool friction. Given the strong correlation between the peak friction and the existence of a tribofilm in the cutting zone, the configuration is used to determine the lower limit of a cutting speed regime, which marks the initiation of lubricant starvation, in cutting of steel using an emulsion as a cutting fluid.