๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Experimental and numerical investigation of grid sheet bending behavior in four-roll bending

โœ Scribed by X. Gu; M. Franzke; M. Bambach; G. Hirt

Publisher
International Academy for Production Engineering
Year
2010
Tongue
English
Weight
547 KB
Volume
59
Category
Article
ISSN
0007-8506

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Experimental and numerical analysis of m
Experimental and numerical analysis of multilayered steel sheets upon bending
โœ Tetsuo Oya; Nicolas Tiesler; Seiichiro Kawanishi; Jun Yanagimoto; Toshihiko Kose ๐Ÿ“‚ Article ๐Ÿ“… 2010 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 690 KB

In this study, the bending formability of multilayered steel sheets is evaluated by tensile tests, V-bending tests, and hemming tests. Enhanced formability was observed in these experiments, namely, the constituent high-strength materials were elongated beyond the original fracture strain limit. As

Experimental and numerical investigation
Experimental and numerical investigation of circularly lobed ejector with bend mixers
โœ You-Hong Liu; Wei Liu ๐Ÿ“‚ Article ๐Ÿ“… 2007 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 859 KB

## Abstract The vent pipe for a turbo shaft engine may be required to have a lobed nozzle installed and to bend for the purpose of infrared stealth. The experimental setup was a circular 12โ€lobed nozzle with bend mixers to study the effects on the pumping performance of the lobed bend mixer paramet

An experimental and computational invest
An experimental and computational investigation of crack growth initiation in three-point bend fracture specimens
โœ V.G. Degiorgi; P. Matic; I. Bar-On; G.M.C. Lee ๐Ÿ“‚ Article ๐Ÿ“… 1995 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 571 KB

An experimental and computational study of HY-100 steel three-point bend fracture specimens was performed. Two specimens were considered in the experimental portion of the study, differing with respect to thickness and the presence of side grooves. Plane stress and plane strain finite element analys