𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Experimental and kinetic modeling study of the oxidation of n-propylbenzene

✍ Scribed by P. Dagaut; A. Ristori; A. El Bakali; M. Cathonnet


Book ID
108321092
Publisher
Elsevier Science
Year
2002
Tongue
English
Weight
372 KB
Volume
81
Category
Article
ISSN
0016-2361

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


Experimental and modeling study of the o
✍ F. Battin-Leclerc; R. Bounaceur; N. Belmekki; P. A. Glaude 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 549 KB

## Abstract This paper describes an experimental and modeling study of the oxidation of the three isomers of xylene (ortho‐, meta‐, and para‐xylenes). For each compound, ignition delay times of hydrocarbon–oxygen–argon mixtures with fuel equivalence ratios from 0.5 to 2 were measured behind reflect

Experimental and modeling study of the o
✍ J. C. Bauge; F. Battin-Leclerc; F. Baronnet 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 210 KB 👁 2 views

This article describes an experimental and modeling study of the oxidation of isobutene. The low-temperature oxidation was studied in a continuous-flow stirred-tank reactor operated at constant temperature (from 833 to ) and pressure with fuel 913 K (1 atm), equivalence ratios from 3 to 6 and spac

Experimental and modeling study of the o
✍ R. Bounaceur; I. Da Costa; R. Fournet; F. Billaud; F. Battin-Leclerc 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 404 KB 👁 1 views

## Abstract This paper describes an experimental and modeling study of the oxidation of toluene. The low‐temperature oxidation was studied in a continuous flow stirred tank reactor with carbon‐containing products analyzed by gas chromatography under the following experimental conditions: temperatur

Experimental and modeling study of the o
✍ G. Dayma; P. A. Glaude; R. Fournet; F. Battin-Leclerc 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 231 KB

## Abstract Ignition delays of cyclohexene–oxygen–argon mixtures were measured behind shock. Mixtures contained 1 or 2% of hydrocarbons for equivalence ratios ranging from 0.5 to 2. Reflected shock waves permitted to obtain temperatures from 1050 to 1520 K and pressures from 7.7 to 9.1 atm. The exp