✦ LIBER ✦

Experience in guaranteeing the composition of IF automotive sheet steel

✍ Scribed by Fang Ma; Mantang Song; Huizhong Wan

Book ID: 106463392
Publisher: Springer US
Year: 2009
Tongue: English
Weight: 118 KB
Volume: 53
Category: Article
ISSN: 0026-0894
DOI: 10.1007/s11015-009-9145-0

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Emerging technologies in the hot-dip coa

Emerging technologies in the hot-dip coating of automotive sheet steel

✍ Vijay Jagannathan 📂 Article 📅 1993 🏛 The Minerals, Metals & Materials Society 🌐 English ⚖ 734 KB

Influence of cooling conditions in conti

Influence of cooling conditions in continuous annealing on the properties of automotive sheet steel

✍ M. N. Bodyako; L. N. Gresskii; V. V. Krylov-Olefirenko; L. I. Frantsenyuk 📂 Article 📅 1987 🏛 Springer US 🌐 English ⚖ 264 KB

Features of the recovery process in ferr

Features of the recovery process in ferritic grains with different crystallographic orientations in low-alloy automotive sheet steel

✍ A. M. Nesterenko; L. M. Storozheva 📂 Article 📅 1989 🏛 Springer US 🌐 English ⚖ 368 KB

Composition analysis of the plating on e

Composition analysis of the plating on electrolytically treated steel sheets in chromic acid solution

✍ Lin Lu; Tiancheng Liu; Xiaogang Li 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 497 KB

The structure and composition of the chromium plating on Tin Free Steel (TFS) were investigated and analyzed with scanning electron microscopy (SEM), energy dispersive analysis of X-ray (EDS), X-ray photoelectron spectroscopy (XPS) and coulometric electrolysis method. The plating under investigation

Determination of thickness distribution

Determination of thickness distribution and composition of thin coatings by EPMA: Application in the field of steel sheet production

✍ Mayr, Michael ;Angeli, Johann ;Pimminger, Michael ;Paesold, Dieter 📂 Article 📅 1990 🏛 Springer-Verlag ⚖ 756 KB

Use of a magnetic method for estimating

Use of a magnetic method for estimating the deformation stability of retained austenite in sheet high-strength economically alloyed steels used in the automotive industry

✍ R. A. Savray; A. V. Makarov; I. Yu. Pyshmintsev; M. A. Uimin 📂 Article 📅 2006 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 218 KB