Exhaust dyeing of polyester-based textiles using high-temperature–alkaline conditions
✍ Scribed by N. A. Ibrahim; M. A. Youssef; M. H. Helal; M. F. Shaaban
- Publisher
- John Wiley and Sons
- Year
- 2003
- Tongue
- English
- Weight
- 127 KB
- Volume
- 89
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
The factors affecting the dyeability of polyester‐based textiles with disperse dyes in an alkaline medium were studied. It was found, for a given set of dyeing conditions, that (a) the appropriate conditions for attaining a higher color yield were 45 min at 130°C with pH 9 using a material‐to‐liquor ratio of 1/10; (b) increasing the Diaserver® AD‐95 concentration to 2% ows (based on weight of substrate) as well as including triethanolamine to 2% ows in the dyeing formulations bring about a significant improvement in the dye uptake; (c) both a preheat setting from 160 to 200°C/30 s and an alkaline weight reduction have a positive impact on postdyeing with the used disperse dye; (d) the extent of dye uptake as well as the color strength are governed by the type of substrate, that is, knitted fabric > spun yarn > woven fabric, nature of the dye stabilizer, that is, EDTA > Diaserver® AD‐95 > Tinoclorite® CBB > citric acid > none, as well as kind of the disperse dye; (e) direct reuse of the disperse dyebaths, without reconstitution, in the dyeing of the used substrates was shown to be feasible in a single shade and in the reverse‐order dyeings (dark → light); (f) one‐bath, one‐step exhaust dyeing of polyester/cotton‐knitted fabric using selected disperse reactive dyes combinations under high‐temperature alkaline conditions is feasible; and (g) the color and fastness properties of the resultant dyeings depend on the type of the used auxiliaries, in addition to the nature of disperse/reactive dyes combinations as well as compatibility with other ingredients. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3563–3573, 2003