✦ LIBER ✦

Evaluation of morphological and chemical aspects of different wood species by spectroscopy and thermal methods

✍ Scribed by Maria-Cristina Popescu; Carmen-Mihaela Popescu; Gabriela Lisa; Yusaku Sakata

Publisher: Elsevier Science
Year: 2011
Tongue: English
Weight: 872 KB
Volume: 988
Category: Article
ISSN: 0022-2860
DOI: 10.1016/j.molstruc.2010.12.004

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Evaluation of thermally modified beech a

Evaluation of thermally modified beech and spruce wood and their properties by FT-NIR spectroscopy

✍ Helmut Bächle; Bernhard Zimmer; Elisabeth Windeisen; Gerd Wegener 📂 Article 📅 2010 🏛 Springer 🌐 English ⚖ 557 KB

Rapid assessment of physical properties

Rapid assessment of physical properties and chemical composition of thermally modified wood by mid-infrared spectroscopy

✍ Marcos M. González-Peña; Michael D. C. Hale 📂 Article 📅 2010 🏛 Springer 🌐 English ⚖ 609 KB

Evaluation of the water binding properti

Evaluation of the water binding properties of meat binders, substitutes and extenders by different physical and chemical methods

✍ Heinevetter, L. ;Gassmann, B. ;Kroll, J. 📂 Article 📅 1987 🏛 John Wiley and Sons 🌐 English ⚖ 457 KB

From investigations concerning water binding capacity measured by an improved BAUMANN technique, differential scanning calorimetry, nitrogen solubility, moisture sorption isotherms, specific surface area. and specific volume of powdered proteinaceous materials proposed as binders and/or substitutes

Raman spectroscopy of thermally annealed

Raman spectroscopy of thermally annealed TiO2 thin films obtained by chemical vapour deposition and the spray method

✍ A Turković; M Ivanda; V Vraneša; A Drašner 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 241 KB

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB