Evaluation of interfacial layer properties in the polystyrene/silica nanocomposite
โ Scribed by Mehrzad Mortezaei; Gholamali Farzi; Mohammad Reza Kalaee; Mahmood Zabihpoor
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- English
- Weight
- 598 KB
- Volume
- 119
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
## Abstract The effect of calcium salt content in the poly(ฮตโcaprolactone) (PCL)/silica nanocomposite on the nucleation and growth behavior of apatite layer in simulated body fluid (SBF) was investigated. The specimens were prepared with low (L) and high (H) concentrations of calcium nitrate tetrah
The interfacial transition zone (ITZ) as the weakest position in concrete is always paid much attention. This paper presents the results of an investigation on the interfacial bond between aggregate and matrix in the near surface layer of concrete at the macro-and micro-level. Specimens with differe
## Abstract Precursors of polyurethane chains have been reacted by means of __in situ__ polymerization with organically modified montmorillonite clay to obtain polyurethane nanocomposites containing from 1 to 4 wt % of nanoreinforcement. The effective final dispersion of inorganic component at nano
## Abstract The effect of addition of chloroprene rubber (CR) on the dispersion of silica in EPDM (ethyleneโpropyleneโdiene terpolymer) was studied. It was observed that physical properties of the vulcanizates could be significantly increased at the EPDM : CR blend ratio of 92.5 : 7.5. SEM microgra