✦ LIBER ✦

Evaluation of bimaterial stress intensity factors using a finite element-boundary element alternating method

✍ Scribed by S. Lahiri; B.V. Sankar; P.A. Mataga

Book ID: 107752567
Publisher: Elsevier Science
Year: 1996
Tongue: English
Weight: 803 KB
Volume: 53
Category: Article
ISSN: 0013-7944
DOI: 10.1016/0013-7944(94)00302-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Evaluating the stress intensity factors

Evaluating the stress intensity factors of anisotropic bimaterials using boundary element method

✍ Chao-Shi Chen; Chien-Chung Ke; Chia-Huei Tu 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 445 KB

## Abstract This paper presents a boundary element method (BEM) procedure for a linear elastic fracture mechanics analysis in two‐dimensional anisotropic bimaterials. In this formulation, a displacement integral equation is only collocated on the uncracked boundary, and a traction integral equation

Evaluation of dynamic stress intensity f

Evaluation of dynamic stress intensity factors and T-stress using the scaled boundary finite-element method

✍ Chongmin Song; Zora Vrcelj 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 387 KB

A technique to evaluate the dynamic stress intensity factors and T-stress is developed by extending the scaled boundary finite-element method. Only the boundary of the problem domain is discretized. The inertial effect at high frequencies is modeled by a continued fraction solution of the dynamic st

Boundary element analysis of stress inte

Boundary element analysis of stress intensity factors for bimaterial interface cracks

✍ Kang Yong Lee; Hyung Jip Choi 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 769 KB

The stress intensity factors for bimaterial interface cracks are determined by the boundary element method employing the multi-region technique and the double-point concept. A formula relating the stress intensity factors to the crack surface displacement, which is applicable to both the homogeneous

Evaluation of stress intensity factors f

Evaluation of stress intensity factors for a crack normal to bimaterial interface using isoparametric finite elements

✍ Won-Kyun Lim; Chang-Soo Lee 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 326 KB

A~tract--The isoparametric finite elements are applied to determine the stress intensity factors for a pressurized crack perpendicular to and terminating at the interface of two bonded dissimilar materials. A proper definition for the stress intensity factors of a crack perpendicular to a bimaterial

Stress intensity factor analysis by comb

Stress intensity factor analysis by combination of boundary element and finite element methods

✍ N. Miyazaki; T. Ikeda; T. Munakata 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 839 KB

In the present paper, a combination of the boundary element method is proposed for calculating the stress intensity factors of two-dimensional crack problems including mixed mode ones. In this method, finite elements are only allocated around a crack tip and boundary elements are used to discretize

Dynamic stress intensity factors using J

Dynamic stress intensity factors using Ĵ-integral and finite element method

✍ K. Kishimoto; S. Aoki; M. Sakata 📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 501 KB

+ract-A formula is derived for determining the stress intensity factors from the path independent J-integral which has been formulated in the previous paper as the energy release rate by taking the effect of inertia into account. Both pure and mixed mode problems of a suddenly loaded crack can be an