✦ LIBER ✦

Ethylbenzene Dehydrogenation into Styrene: Kinetic Modeling and Reactor Simulation

✍ Scribed by Jae Lee, Won; Froment, Gilbert F.

Book ID: 120420046
Publisher: American Chemical Society
Year: 2008
Tongue: English
Weight: 449 KB
Volume: 47
Category: Article
ISSN: 0888-5885
DOI: 10.1021/ie071098u

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Simulation and optimization of an existi

Simulation and optimization of an existing ethylbenzene dehydrogenation reactor

✍ J. G. P. Sheel; C. M. Crowe 📂 Article 📅 1969 🏛 John Wiley and Sons 🌐 English ⚖ 475 KB

Intrinsic kinetics and industrial reacto

Intrinsic kinetics and industrial reactors modelling for the dehydrogenation of ethylbenzene to styrene on promoted iron oxide catalysts

✍ B.K. Abdalla; S.S.E.H. Elnashaie; S. Alkhowaiter; S.S. Elshishini 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 824 KB

Simulation of the industrial fixed bed c

Simulation of the industrial fixed bed catalytic reactor for the dehydrogenation of ethylbenzene to styrene: heterogeneous dusty gas model

✍ Elnashaie, Said S. E. H.; Abdalla, Babiker K.; Hughes, Ronald 📂 Article 📅 1993 🏛 American Chemical Society 🌐 English ⚖ 616 KB

Kinetics modeling of ethylbenzene dehydr

Kinetics modeling of ethylbenzene dehydrogenation to styrene over a mesoporous alumina supported iron catalyst

✍ Hossain, Mohammad M.; Atanda, Luqman; Al-Yassir, Nabil; Al-Khattaf, Sulaiman 📂 Article 📅 2012 🏛 Elsevier Science 🌐 English ⚖ 735 KB

Simulation and optimization of three exi

Simulation and optimization of three existing ethylbenzene dehydrogenation reactors in series

✍ I. Önal; N. Yalçin; E. Uygun; H. Öztürk 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 371 KB

Mathematical modeling and optimization o

Mathematical modeling and optimization of the dehydrogenation of ethylbenzene to form styrene

✍ David E. Clough; W. Fred Ramirez 📂 Article 📅 1976 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 935 KB

## Abstract A mathematical model is developed for a styrene pilot plant reactor. The steady state version of this model was used to optimize the location of a steam injection port part way along the catalytic bed. Significant improvement in reactor performance was predicted by splitting the steam f