✦ LIBER ✦

Estimation of stress intensity factors and nominal stresses from discrete cod values

✍ Scribed by V.A. Vainshtok; P.Ya. Kravets

Publisher: Elsevier Science
Year: 1991
Tongue: English
Weight: 686 KB
Volume: 38
Category: Article
ISSN: 0013-7944
DOI: 10.1016/0013-7944(91)90004-k

No coin nor oath required. For personal study only.

✦ Synopsis

A method based on the energy balance equation for a cracked body is described for the determination of stress intensity factors and stress distribution in a crack plane from the COD measurements at several points at some distance from the crack tip. The efficiency of the approach proposed is supported by a number of examples.

📜 SIMILAR VOLUMES

Residual Stresses and Stress Intensity F

Residual Stresses and Stress Intensity Factors for Vickers Indentation Cracks in Glass Derived from COD Measurements

✍ T. Fett; Z. Burghard; A. Zimmermann; F. Aldinger 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 385 KB

Vickers indentation cracks are an appropriate tool to determine the crack‐tip toughness K~I0~ of brittle materials as ceramics from the total crack opening displacements. In addition, the residual stresses occurring in the surrounding of an indentation can be evaluated. The fracture mechanics proced

On estimates of stress intensity factors

On estimates of stress intensity factors for cracked beams and pipes

✍ Gao Huajian; George Herrmann 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 931 KB

Justification and improvement of Kienzle

Justification and improvement of Kienzler and Herrmann's estimate of stress intensity factors of cracked beam

✍ Zdeněk P. Bažant 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 228 KB

Kienzler and Hernnan recently showed that good and remarkably simple approximations of the stress intensity factors of cracks in beams can be obtained by bending theory estimations of the strain energy release as the crack is widened into a band of finite width. Their method has been based on equati

Analytical-variational method of solutio

Analytical-variational method of solution for stress intensity factors about anisotropic and isotropic finite plates with double cracks emanating from holes

✍ Dong-shan Fu; Xing Zhang 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 567 KB

Analytical expressions of stress and displacement of anisotropic plates with double cracks near holes are derived by method of function of complex variables. The equations of equilibrium and compatibility, single valued condition of displacement and traction-free conditions along crack surfaces are

Calculation of the stress intensity fact

Calculation of the stress intensity factor of a circumferential crack in a tube originating from a hole under axial tensile and bending loads

✍ C. Mattheck; P. Morawietz; D. Munz 📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 358 KB