𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Estimation of load reduction factors for clay masonry walls

✍ Scribed by Francesca da Porto; Manuel Grendene; Claudio Modena

Publisher
John Wiley and Sons
Year
2009
Tongue
English
Weight
625 KB
Volume
38
Category
Article
ISSN
0098-8847

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Estimation of strength-reduction factors
Estimation of strength-reduction factors for elastoplastic systems: a new approach
✍ Ordaz, M.; PΓ©rez-Rocha, L. E. πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 161 KB πŸ‘ 2 views

A new rule is presented to estimate strength-reduction factors in single-degree-of-freedom elastoplastic oscillators, in which reduction factors depend only on displacement elastic spectra, so they are not an explicit function of structural period. It is found that the proposed rule yields good resu

Application of the arc-length method for
Application of the arc-length method for the stability analysis of solid unreinforced masonry walls under lateral loads
✍ Mu Lu; Arturo E. Schultz; Henryk K. Stolarski πŸ“‚ Article πŸ“… 2005 πŸ› Elsevier Science 🌐 English βš– 391 KB

The stability behavior of slender unreinforced masonry members (URM) under out-of-plane lateral loads in proportion to the axial load is investigated, using a finite element model developed previously [Lu M, Schultz AE, Stolarski HK. Analysis of the influence of tensile strength on the stability of

Stress intensity factors for long axial
Stress intensity factors for long axial surface cracks at the outer wall of a pipe loaded by stress gradients
✍ H. Grebner πŸ“‚ Article πŸ“… 1988 πŸ› John Wiley and Sons 🌐 English βš– 297 KB πŸ‘ 1 views

By means of the finite element method crack opening displacements were calculated for long axial surface cracks at the outer wall of a pipe. The wall thickness to inner radius ratio of the pipe was 1 to 10. Following a procedure introduced be Mattheck et al. weight functions were evaluated by means