𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Estimation of creep life for metals based on damage mechanics

✍ Scribed by Ihara Chiaki; Yanagi Takehiro; Tanaka Takeyuki


Publisher
Elsevier Science
Year
1991
Tongue
English
Weight
531 KB
Volume
39
Category
Article
ISSN
0013-7944

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Low cycle fatigue life estimation for du
✍ N. Bonora; G.M. Newaz πŸ“‚ Article πŸ“… 1998 πŸ› Elsevier Science 🌐 English βš– 913 KB

Al~rset--Continuum damage mechanics is an effective approach to model ductile failure. The same concepts can be extended to the low cycle fatigue damage process, where plasticity is still the key mechanism for crack initiation. In addition, in low cycle fatigue a relevant part of life is spent by th

Estimation of shelf life of natural rubb
✍ Srilekha Sarkar Das; LeRoy W. Schroeder πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 202 KB

## Abstract Samples of full‐length glove‐fingers cut from chlorinated and nonchlorinated latex medical examination gloves were aged for various times at several fixed temperatures and 25% relative humidity. Creep testing was performed using an applied stress of 50 kPa on rectangular specimens (10 m

Estimation of shelf life of natural rubb
✍ Srilekha Sarkar Das; LeRoy W. Shroeder πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 22 KB

After the article title ''Estimation of Shelf Life of Natural Rubber Latex Exam-Gloves Based on Creep Behavior'' was posted online, the authors realized that the lead author's name combination was not correctly coded and would affect any publication searches done by name. It should be listed as ''Sr

Estimation of fatigue damage using syste
✍ D.-Y. Song; N. Otani πŸ“‚ Article πŸ“… 2009 πŸ› Elsevier Science 🌐 English βš– 726 KB

In this study, the fatigue damage of polymer matrix composites (PMC) is estimated quantitatively using the system response based on the mechanical model of PMC. In detail, the discrete equation of PMC is derived using a simplified mechanical model, and the fatigue test is performed. Moreover, the fa