✦ LIBER ✦

Estimating fracture toughness from small specimens

✍ Scribed by H.L. Stark; R.N. Ibrahim

Publisher: Elsevier Science
Year: 1986
Tongue: English
Weight: 606 KB
Volume: 25
Category: Article
ISSN: 0013-7944
DOI: 10.1016/0013-7944(86)90253-5

No coin nor oath required. For personal study only.

✦ Synopsis

A procedure, economic in both labour and material, is proposed for determining fracture toughness for small specimens; results are discussed for a total of 105 specimens drawn from five different materials.

📜 SIMILAR VOLUMES

Prediction of large specimen fracture to

Prediction of large specimen fracture toughness from small specimen tests

✍ Y. Tanaka; K. Suzuki; T. Iwadate 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 843 KB

Fracture toughness determination of brit

Fracture toughness determination of brittle materials using small to extremely small specimens

✍ G. Szendi-Horvath 📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 570 KB

Diametral compression of a grooved, disc shaped specimen is used to determine fracture toughness. This method's most important features are that extremely small specimens can be used and no knowledge of material properties is needed. It is suitable for many brittle materials, e.g. glass, cemented ca

Validity requirements for fracture tough

Validity requirements for fracture toughness measurements obtained from small circumferentially notched cylindrical specimens

✍ R.N. Ibrahim; H.L. Stark 📂 Article 📅 1987 🏛 Elsevier Science 🌐 English ⚖ 487 KB

The authors have earlier proposed a small cylindrical circumferentially notched and fatigue cracked specimen for estimating K,, Finite element studies carried out are discussed with specific attention to the comparison between K,( thus obtained to that obtained experimentally. The size of the plasti

Determination of fracture toughness from

Determination of fracture toughness from thin side-grooved specimens

✍ P.K. Poulose 📂 Article 📅 1987 🏛 Elsevier Science 🌐 English ⚖ 868 KB

Methods of determining fracture toughness from specimens of thickness lower than that required by ASTM Standard, E399 were studied using aluminum and titanium alloy specimens. In thin specimens in which crack growth initiation is clearly marked by a sudden change in the slope of the load-displacemen

The use of small specimen strength ratio

The use of small specimen strength ratio for measuring fracture toughness

✍ W.L. Server; R.A. Wullaert 📂 Article 📅 1979 🏛 Elsevier Science 🌐 English ⚖ 907 KB

Abshnct-The specimen strength ratio (R,) determined from small specimen tests was correlated with plane strain fracture toughness (RI,) values for many beats of AS33B-1 steel. A variety of toading rate and specimen size results suggest that K,, can be predicted from the small specimen strength ratio

The fracture toughness and fracture asse

The fracture toughness and fracture assessments of different specimens

✍ Fashang Ma 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 503 KB

Based on two microscopic failure models, the maximum tension stress criterion and damage criterion, the relationships of the scaling parameters of elastic-plastic stress fields for HRR field and different specimens were established in this paper. The two-fold applications of the relationships were e