๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

ESCA study on tribochemical characteristics of filled PTFE

โœ Scribed by Gong Deli; Xue Qunji; Wang Hongli


Book ID
103478867
Publisher
Elsevier Science
Year
1991
Tongue
English
Weight
582 KB
Volume
148
Category
Article
ISSN
0043-1648

No coin nor oath required. For personal study only.


๐Ÿ“œ SIMILAR VOLUMES


A study of the PEโ€“PTFE system. II. ESCA
โœ Nagarajan, S. ;Stachurski, Z. H. ;Hughes, M. E. ;Larkins, F. P. ๐Ÿ“‚ Article ๐Ÿ“… 1982 ๐Ÿ› Wiley (John Wiley & Sons) ๐ŸŒ English โš– 609 KB

## Abstract Samples of polyethylene and polytetrafluorethylene were sintered at 200ยฐC. The samples were cleaved and cut, and the two types of surfaces were studied by ESCA. The possibility of chemical interaction between the two polymers and the formation of a transitional layer is postulated on th

Friction and wear characteristics of PTF
โœ Zhao-Zhu Zhang; Wei-Min Liu; Qun-Ji Xue; Wei-Chang Shen ๐Ÿ“‚ Article ๐Ÿ“… 1997 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 539 KB

Four kinds of polytetrafluoroethylene(PTFE)-based composites, such as pure PTFE, PTFE/30%(v)PbO, PTFE/30%(v)Pb 3 O 4 , and PTFE/30%(v)Cu 2 O composite, were prepared. The friction and wear properties of these metal oxides filled PTFE composites sliding against GCr15 bearing steel in both dry and lub

A Study on the Friction and Wear Behavio
โœ Shi-Quan Lai; Tong-Sheng Li; Xu-Jun Liu; Ren-Guo Lv ๐Ÿ“‚ Article ๐Ÿ“… 2004 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 241 KB

## Abstract **Summary:** A solid lubricant composite material was prepared by compression molding PTFE and acid treated nanoโ€attapulgite. The friction and wear tests were performed on a blockโ€onโ€ring wear tester. Scanning electron microscopy (SEM), energyโ€dispersive Xโ€ray spectrometer (EDS) and DSC

Friction and wear characteristics of cop
โœ Zhao-Zhu Zhang; Qun-Ji Xue; Wei-Min Liu; Wei-Chang Shen ๐Ÿ“‚ Article ๐Ÿ“… 1998 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 472 KB ๐Ÿ‘ 2 views

Four kinds of polytetrafluoroethylene (PTFE)-based composites, such as pure PTFE, PTFE ฯฉ 30(v)%Cu, PTFE ฯฉ 30(v)%Cu 2 O, and PTFE ฯฉ 30(v)%CuS composite, were prepared. Then the friction and wear properties of the PTFE composites filled with Cu, Cu 2 O, or CuS sliding against GCr15-bearing steel under