𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Equivalent transmission-line model for optically controlled microstrip slow-wave structures

✍ Scribed by Avanish Bhadauria; Enakshi Khular Sharma; Anand K. Verma

Publisher
John Wiley and Sons
Year
2001
Tongue
English
Weight
213 KB
Volume
31
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

This paper presents equivalent transmission‐line circuit models for an optically controlled microstrip slow‐wave MIS structure which are valid over all regions of operation, namely, lossy dielectric, slow wave, and skin effect. The models take into account both capacitance and inductance due to the skin effect. The results for the phase constant (slowing factor) and attenuation by the equivalent‐circuit models compare well with those obtained by an exact wave analysis. © 2001 John Wiley & Sons, Inc. Microwave Opt Technol Lett 31: 292–298, 2001.

📜 SIMILAR VOLUMES

Improved equivalent circuit model of pra
Improved equivalent circuit model of practical coupled-cavity slow-wave structures for TWTs
✍ V. Latha Christie; Lalit Kumar; N. Balakrishnan 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 162 KB

## Abstract The existing equivalent circuit model of space‐harmonic coupled‐cavity slow‐wave structures was extended to model structures with double slots and tapered or step‐tapered ferrules. This model was validated by comparing its results for dispersion and total impedance characteristics of ty

An exact lumped-element equivalent circu
An exact lumped-element equivalent circuit model for transmission-line transformers formed from coupled microstrip lines
✍ John Post 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 273 KB

## Abstract This paper introduces an exact lumped‐element equivalent circuit model for Ruthroff transmission‐line transformers (TLTs) constructed from coupled microstrip lines. Measured results are compared with model predictions from 0.01 GHz up to 16.7 GHz for the case of three spiral TLTs fabric

3D photo-induced load modeling for optic
3D photo-induced load modeling for optically controlled microwave microstrip line
✍ J.-D. Arnould; R. Gary; A. Vilcot 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 159 KB

## Abstract This paper deals with the 3D modeling of the photo‐induced load created by a laser that illuminates a semiconductor substrate. This independent optical command allows us to change the microwave behavior of the microstrip device. We present a 3D‐equivalent microwave model for the photo‐i