✦ LIBER ✦

Equipment fabricated of titanium and its alloys

✍ Scribed by V. M. Luk'yanenko

Publisher: Springer
Year: 1971
Tongue: English
Weight: 287 KB
Volume: 7
Category: Article
ISSN: 0009-2355
DOI: 10.1007/bf01163195

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fabrication of titanium heat-exchange eq

Fabrication of titanium heat-exchange equipment

✍ V. A. Besednyi; G. M. Shelenkov; A. Ya. Vasilega 📂 Article 📅 1967 🏛 Springer 🌐 English ⚖ 459 KB

Experience in the fabrication of titaniu

Experience in the fabrication of titanium welded chemical equipment

✍ V. A. Besednyi; G. M. Shelenkov 📂 Article 📅 1965 🏛 Springer 🌐 English ⚖ 911 KB

Fabrication of chemical equipment from n

Fabrication of chemical equipment from nickel-base alloys

✍ M. M. Abelev; A. N. Khrustalev 📂 Article 📅 1972 🏛 Springer 🌐 English ⚖ 343 KB

Recent titles on titanium and its alloys

📂 Article 📅 1987 🏛 Elsevier Science 🌐 English ⚖ 300 KB

Crevice corrosion monitoring of titanium

Crevice corrosion monitoring of titanium and its alloys using microelectrodes

✍ N. Rajendran; T. Nishimura 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 German ⚖ 262 KB

## Abstract Crevice corrosion of titanium and its alloys in 10% sodium chloride was investigated at 100°C with the aid of microelectrodes. Potential, pH and chloride ion concentration inside the crevice were monitored using an Ag/AgCl electrode, a tungsten microelectrode and a Ag/AgCl chloride ion

Characterisation of anodic films formed

Characterisation of anodic films formed on titanium and its alloys

✍ J.C. Mirza Rosca; E.D. Herrera Santana; J. Rodriguez Castro; A. Santana Lopez; E 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 German ⚖ 205 KB

The properties of the anodic oxide films formed on titanium and its implant alloys Ti-5Al-4V and Ti-6Al-4Fe are investigated in this paper. Anodic oxide films were prepared by electrochemical treatment in 3M sulphuric acid solution at 60 V for 1 min, followed by a thermal treatment consisting of hea