Isobaric enthalpy increment measurements on nitrogen in the gas phase are presented over the temperature range 160 K to 260 K, at the pressures (0.3, 3, 5, and 15) MPa. The measurements were performed in an electrically heated flow calorimeter. Comparisons have been made with the best available meas
Enthalpy increment measurements on liquid ethane between the temperatures 146.0 K and 256.2 K, at pressures (≈1.6, 3.20, and 5.07) MPa
✍ Scribed by Per G. Grini; Harald S. Mæhlum; Einar Brendeng; Geir A. Owren
- Publisher
- Elsevier Science
- Year
- 1996
- Tongue
- English
- Weight
- 351 KB
- Volume
- 28
- Category
- Article
- ISSN
- 0021-9614
No coin nor oath required. For personal study only.
✦ Synopsis
Isobaric enthalpy increment measurements have been made on liquid ethane. The temperature and pressure ranges covered by the measurements are (146.0 to 256.2) K and (1.16 to 5.07) MPa. The measurements have an average standard uncertainty of 20.07 kJ•kg -1 or 0.21 per cent of the enthalpy increment. A new flow calorimeter test loop that avoids the two-phase region is described. The flow calorimeter used is of the electrically heated type.
📜 SIMILAR VOLUMES
Enthalpy increments measured with a flow calorimeter are reported for \(\mathrm{CO}_{2}\) at temperatures from \(233.169 \mathrm{~K}\) to \(358.140 \mathrm{~K}\) at pressures near \(15 \mathrm{MPa}\). The reported values agree with literature values within the estimated uncertainties. Results for \(
An automated bellows volumometer has been used to obtain volume ratios for 2,2,2-trifluoroethyl difluoromethyl ether (CHF2OCH2CF3, RE245) and 1,2,2,2,-tetrafluoroethyldifluoromethyl ether (CHF2OCHFCF3, RE236) for pressures up to 380 MPa in the temperature range (278.15 to 338.13) K in the liquid pha
A bellows volumometer has been used to obtain volume ratios relative to p = 0.1 MPa for each of the liquids pentan-2-one, hexan-2-one, and 4-methylpentan-2-one at the temperatures (278.15, 288.15, 298.14, 313.14, 323.14, and 338.13) K for pressures up to 386 MPa or close to the freezing pressure, wh