Enhancement of thermal conductivity with carbon nanotube for nanofluids
✍ Scribed by Min-Sheng Liu; Mark Ching-Cheng Lin; I-Te Huang; Chi-Chuan Wang
- Publisher
- Elsevier Science
- Year
- 2005
- Tongue
- English
- Weight
- 213 KB
- Volume
- 32
- Category
- Article
- ISSN
- 0735-1933
No coin nor oath required. For personal study only.
✦ Synopsis
Thermal conductivity enhancements in ethylene glycol and synthetic engine oil in the presence of multi-walled carbon nanotubes (MWNTs) are investigated. CNT nanofluids are prepared using a two-step method. The volume concentration of CNT–ethylene glycol suspensions is below 1.0 vol.% and that of CNT–synthetic engine oil suspensions is below 2.0 vol.%. The thermal conductivities of the CNT suspensions are measured with a modified transient hot wire method. The results show that CNT–ethylene glycol suspensions have noticeably higher thermal conductivities than the ethylene glycol base fluid without CNT. The results for CNT–synthetic engine oil suspensions also exhibit the same trend. For CNT–ethylene glycol suspensions at a volume fraction of 0.01 (1 vol.%), thermal conductivity is enhanced by 12.4%. On the other hand, for CNT–synthetic engine oil suspension, thermal conductivity is enhanced by 30% at a volume fraction of 0.02 (2 vol.%). The rates of increase are, however, different for different base fluids. The CNT–synthetic engine oil suspension has a much higher enhanced thermal conductivity ratio than the CNT–ethylene glycol suspension.
📜 SIMILAR VOLUMES
A novel expression for the thermal conductivity of nanofluids is proposed, which incorporates the kinetic theory to describe the contribution of the Brownian motion of the nanoparticles with a more realistic definition of the mean free path, and additionally to consider the contribution of the inter
It is obvious that the applicability and efficiency of nanofluids (suspensions contained nanoparticles) are related to their high heat transfer coefficients, especially thermal conductivity. Many parameters affect this property including size, shape and source of nanoparticles, surfactants, power of
Nanofluids are prepared by dispersing TiO 2 nanoparticles in rod-shapes of ∅10 nm × 40 nm (diameter by length) and in spherical shapes of ∅15 nm in deionized water. A transient hot-wire apparatus with an integrated correlation model is used to measure the thermal conductivities of these nanofluids m