## Abstract A mixed coupling structure is proposed for the cross coupling of a comb‐line filter. The proposed structure consists of an electric coupling probe and a magnetic coupling window, and the coupling required for the cross coupling of a cross‐coupled filter can be achieved with much easier
Enhancement of the rejection bandwidth of microwave-coupled lines filters using spurline structures
✍ Scribed by J. R. Loo-Yau; O. I. Gómez-Pichardo; F. Sandoval-Ibarra; M. C. Maya-Sánchez; J. A. Reynoso-Hernández
- Publisher
- John Wiley and Sons
- Year
- 2011
- Tongue
- English
- Weight
- 425 KB
- Volume
- 53
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A new bandstop‐coupled line filter using spurline structures has been presented in this work. The new bandstop filter enhances the rejection bandwidth of bandstop coupled line filters in a 50%. To demonstrate the idea, classical bandstop‐coupled line filters with and without simple spurlines structure were designed using Rogers material, and their frequency response were compared. Simulations performed with momentum agree with experimental results, demonstrating the usefulness of spurlines structures in the enhancement of the bandwidth of coupled line filters. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett 53:2893–2896, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26382
📜 SIMILAR VOLUMES
## Abstract In this paper, a microstrip parallel‐coupled bandpass filter based on electromagnetic bandgap (EBG) structures to achieve spurious suppression is presented. The EBG loops of the middle layer add an extra stopband‐rejection mode to the 2^nd^ and 3^rd^ harmonics of the filter with attenua
## Abstract A new eigenmode algorithm based on the method of lines and the generalized transmission line equations is applied on full‐wave analysis of (3‐D) MMIC components. The analytical calculation in the direction of propagation enables the analysis of structures of very short or long interconn
## Abstract A novel ultra‐wideband (UWB) bandpass filter (BPF) is proposed and implemented by using a four‐mode resonator, which has four resonant frequencies within the passband of the filter. By enhancing the coupling between the resonator and the input/output feed lines, an UWB BPF with six tran
## Abstract This paper describes investigations of the longitudinally ferrite circulator realized in slot‐line technology. The proposed planar structure of circulator allowed to achieve small dimensions of the device. Also, the insertion losses comparable to ones actually published for microstrip s
## Abstract The original article to which this Erratum refers was published in __Microwave and Optical Technology Letters__Microwave Opt Technol Lett (2007) 49(3) 692