✦ LIBER ✦

Enhanced electron injection in organic light-emitting devices using Al/LiF electrodes

✍ Scribed by S.Y. Park; C.H. Lee; W.J. Song; C. Seoul

Book ID: 108496950
Publisher: Elsevier Science
Year: 2001
Tongue: English
Weight: 320 KB
Volume: 1
Category: Article
ISSN: 1567-1739
DOI: 10.1016/s1567-1739(00)00022-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Dipyrenylpyridines for electron-transpor

Dipyrenylpyridines for electron-transporting materials in organic light emitting devices and their structural effect on electron injection from LiF/Al cathode

✍ Yong-Jin Pu; Makoto Yoshizaki; Takahiro Akiniwa; Ken-ichi Nakayama; Junji Kido 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 339 KB

Dipyrenylpyridine (PY1) and 2,6-dipyrenylpyridine (PY2) were synthesized to achieve not only efficient electron injection from cathode but also high electron mobility. The both of compounds showed much higher electron mobilities than that of Alq 3 , and have a similar ionization potential and electr

Carbon nanotube modified electrodes for

Carbon nanotube modified electrodes for enhanced brightness in organic light emitting devices

✍ A.R. Inigo; J.M. Underwood; S.R.P. Silva 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 584 KB

Acid oxidised multiwall carbon nanotubes (COOH-MWCNT) have been introduced as a hole injection buffer layer in an organic light emitting diodes (OLED). We show that the OLED with COOH-MWCNT as a buffer layer provides higher brightness with lower operating voltages. The addition of a COOH-MWCNT buffe

Electron injection and electroluminescen

Electron injection and electroluminescence investigation of organic light-emitting devices based on a Sn/Al cathode

✍ Feng Li; Jing Feng; Gang Cheng; Shiyong Liu 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 94 KB

Enhancing Light Extraction in Top-Emitti

Enhancing Light Extraction in Top-Emitting Organic Light-Emitting Devices Using Molded Transparent Polymer Microlens Arrays

✍ Edward Wrzesniewski; Sang-Hyun Eom; Weiran Cao; William T. Hammond; Sangjun Lee; 📂 Article 📅 2012 🏛 John Wiley and Sons 🌐 English ⚖ 985 KB

Improvement of electron–hole injection b

Improvement of electron–hole injection balance in Si-anode organic light-emitting diodes by using enhanced electron injection organic of fluorinated tris-(8-hydroxy-quinolinato) aluminum

✍ N. Liu; Y. Z. Li; M. M. Shi; Y. W. Shi; G. Z. Ran; G. G. Qin; M. Wang; H. Z. Che 📂 Article 📅 2009 🏛 Springer 🌐 English ⚖ 388 KB

Enhanced hole injection and improved per

Enhanced hole injection and improved performance in organic light-emitting devices by utilizing a novel composite hole injection layer

✍ Hua-Ping Lin; Dong-Bin Yu; Xiao-Wen Zhang; Jun Li; Liang Zhang; Xue-Yin Jiang; Z 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 573 KB

Organic light-emitting devices (OLEDs) with MoO x , Ag 2 O and a composite layer consisting of Ag 2 O//MoO x as hole injection layers (HIL) have been investigated. We have observed that the insertion of such a composite layer leads to a striking improvement in the electrical properties with lower dr