𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Energy Release Rates for the Peeling of Flexible Membranes and the Analysis of Blister Tests

✍ Scribed by J.G. Williams

Book ID
110249447
Publisher
Springer Netherlands
Year
1997
Tongue
English
Weight
170 KB
Volume
87
Category
Article
ISSN
1573-2673

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

The calculation of the strain energy rel
The calculation of the strain energy release rates and the stress intensity factors for several crack conditions
✍ Wei-Yang Huang πŸ“‚ Article πŸ“… 1982 πŸ› Elsevier Science 🌐 English βš– 71 KB

Chinese abstracts 133 The experimental results show that (I) X, of two thin sheet aluminum alloys are valid; they\_ are I?, = 201.39 kg/mm"\* and l?,, = 208.31 kg/mm"2 of Lyl22c2(1), K, =226.18kg/mm"2 and K,,= 234.55 kg/mm3" of Lc4 -cs; (2) the R-curves of the four thin sheet aluminum alloys are ind

Influence of the Mode Mixity Ratio and T
Influence of the Mode Mixity Ratio and Test Procedures on the Total Energy Release Rate in Carbon-Epoxy Laminates
✍ V. MollΓ³n; J. ViΓ±a; A. ArgΓΌelles; J. Bonhomme; I. ViΓ±a πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier 🌐 English βš– 214 KB

In this work, the fracture behaviour under modes I, II and different mixed mode I/II ratios has been studied for a AS4/3501-6 carbon fibre epoxy resin laminate. Mixed Mode tests were carried out by means of two different procedures: MMB (Mixed Mode Bending) and ADCB (Asymmetric Double Cantilever Bea