✦ LIBER ✦

Elevated-temperature plasticity and mechanical properties of a rare earth-modified Mg–Zn–Al alloy

✍ Scribed by Jing Zhang; Yuchen Dou; Baoxiang Zhang; Xiaodong Luo

Book ID: 113794222
Publisher: Elsevier Science
Year: 2011
Tongue: English
Weight: 567 KB
Volume: 65
Category: Article
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2011.01.001

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microstructure and mechanical behaviour

Microstructure and mechanical behaviour of an elevated temperature Mg-rare earth based alloy

✍ C.J. Bettles; M.A. Gibson; S.M. Zhu 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 1011 KB

Cryogenic and elevated temperature stren

Cryogenic and elevated temperature strengths of an Al−Zn−Mg−Cu alloy modified with Sc and Zr

✍ S. V. Senkova; O. N. Senkov; D. B. Miracle 📂 Article 📅 2006 🏛 The Minerals, Metals & Materials Society 🌐 English ⚖ 272 KB

Mechanical properties at elevated temper

Mechanical properties at elevated temperature of a hot-deformed Mg–Al–Ca–Mn–Sr alloy

✍ Yasumasa Chino; Yusuke Nakaura; Koichi Ohori; Akira Kamiya; Mamoru Mabuchi 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 829 KB

Hot-deformation was performed on a Mg-Al-Ca-Mn-Sr alloy by caliber-rolling at 773 K and its mechanical properties were investigated by tensile tests at 473 K and creep tests at 423 K. The rolled specimens showed larger and elongated grain shape along to RD compared with the as-received specimen. The

Texture and mechanical properties of a s

Texture and mechanical properties of a superplastically deformed Mg–Al–Zn alloy sheet

✍ H. Watanabe; M. Fukusumi; H. Somekawa; T. Mukai 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 253 KB

Elevated temperature mechanical properti

Elevated temperature mechanical properties of A 5056 Al-Mg alloy processed by equal-channel-angular-extrusion

✍ M. Kawazoe; T. Shibata; T. Mukai; K. Higashi 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 578 KB

Mechanical properties and formability of

Mechanical properties and formability of an Mg–6%Li–1%Zn alloy thin sheet at elevated temperatures

✍ Horng-Yu Wu; Geng-Zhong Zhou; Zhen-Wei Gao; Chui-Hung Chiu 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 607 KB

Forming limit diagram presents limit strains for different strain paths. In this study, forming limit diagrams were determined for a LZ61 alloy sheet with a thickness of 0.6 mm. Uniaxial tension tests and press-forming tests were carried out at various temperatures. The influences of anisotropy and