𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Electromagnetic modeling of passive circuit elements in MMIC

✍ Scribed by Chang, D.C.; Zheng, J.-X.

Book ID
114551154
Publisher
IEEE
Year
1992
Tongue
English
Weight
668 KB
Volume
40
Category
Article
ISSN
0018-9480

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Efficient analysis of passive microstrip
Efficient analysis of passive microstrip elements in MMICs
✍ Naishadham, Krishna ;Nuteson, Todd W. 📂 Article 📅 1994 🏛 John Wiley and Sons 🌐 English ⚖ 955 KB

## Abstract A new full‐wave, space‐domain moment method implementation is developed for the analysis and circuit‐characterization of passive microstrip elements (in an open environment) at microwave frequencies. The computational time and memory requirements are significantly reduced by filling the

Cad compatible accurate models of microw
Cad compatible accurate models of microwave passive lumped elements for mmic applications
✍ Sadhir, Virender K. ;Bahl, Inder J. ;Willems, David A. 📂 Article 📅 1994 🏛 John Wiley and Sons 🌐 English ⚖ 996 KB

## Abstract This article presents accurate measurement‐based models derived from measured S‐parameters of passive circuit elements which include inductors, thin‐film resistors, interdigital and MIM capacitors, via holes, and airbridges for use in the computer‐aided design of monolithic microwave in

Lumped circuits coupled with electromagn
Lumped circuits coupled with electromagnetic Whitney element models
✍ M. Feliziani; F. Maradei 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 98 KB

The coupling between lumped electronic circuits and electromagnetic "elds is analysed in time domain by the "nite element method (FEM) using edge elements. The classical solution of the vector electric "eld wave equation by Whitney-elements is modi"ed to take into account the circuit elements. They

Modeling transmission line circuit eleme
Modeling transmission line circuit elements in the FDTD method
✍ Thomas P. Montoya; Glenn S. Smith 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 288 KB

The work presented in this letter shows the effects of tilting ( ) the periodic elements in a frequency-selecti¨e surface FSS . The intent is to show the existence of another degree of freedom that can be used in designing FSS. The analysis is done using the periodic Green's function as the kernel t