The rate of dissolution of Armco Fe has been measured as a function of time for deaerated solutions of constant ionic strengtb (HCl + NaCl). For pH < 1.5, no appreciable change of the measured polarisation resistance was observed. For 1.5 -=I pH < 3 the polarisation resistance gave straight lines w
Electrohydrodynamic impedance study of anodically formed salt films on iron in chloride solutions
โ Scribed by A.C. West; R.-D. Grimm; D. Landolt; C. Deslouis; B. Tribollet
- Publisher
- Elsevier
- Year
- 1992
- Tongue
- English
- Weight
- 650 KB
- Volume
- 330
- Category
- Article
- ISSN
- 1572-6657
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
Anodic behavior of iron and Fe-l.82%P was studied in 0.5 M NazCO 3 + 1.0 M NaHCO 3 at 75ยฐC with the use of ac impedance and dc methods. In the active and passive regions, anodic currents and interfacial capacitance (Cir) of the Fe-P alloy were higher than those for iron, and the charge transfer resi
The frequency dependence of the impedance of the anodic tilm on Zr has been determined using UC impedance spectroscopy. This technique has been used to provide an in situ monitor of the thickness and resistance of the lilm during formation. The data suggest that the film can be modelled adequately b
An in-situ photoacoustic (PAS) technique, using a piezoelectric detector with high sensitivity was applied to the study on duplex oxide films anodically formed on copper in pH 8.4 borate solution. The PAS signals from the copper electrode were produced by an irradiation of light beam with a waveleng
The variations of the equivalent parallel resistance and capacitance of anodic films formed on Ta and Nb in varying concentrations of H2SO4 suggest that the volume of film formed per coulomb is much greater in 100)~, acid, although the dielectric constant is substantially unchanged. The field requir