✦ LIBER ✦

Electrodeposition of nanodiamond particles on aluminium alloy A319 for improved tribological properties

✍ Scribed by Kalyanasundaram, D.; Molian, P.

Book ID: 111954835
Publisher: The Institution of Engineering and Technology
Year: 2008
Tongue: English
Weight: 887 KB
Volume: 3
Category: Article
ISSN: 1750-0443
DOI: 10.1049/mnl:20080023

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Advanced Tribology || Thermal Oxidized C

Advanced Tribology || Thermal Oxidized Coating on Surface of Titanium Alloy for Improvement of Tribological Properties in Vacuum

✍ Luo, Jianbin; Meng, Yonggang; Shao, Tianmin; Zhao, Qian 📂 Article 📅 2009 🏛 Springer Berlin Heidelberg 🌐 English ⚖ 454 KB

"Advanced Tribology" is the proceedings of the 5th China International Symposium on Tribology (held every four years) and the 1st International Tribology Symposium of IFToMM, held in Beijing 24th-27th September 2008. It contains seven parts: lubrication; friction and wear; micro/nano-tribology; trib

Influence of the size and morphology of

Influence of the size and morphology of silicon particles on the physical, mechanical and tribological properties of some aluminium — silicon alloys

✍ B. K. Prasad; K. Venkateswarlu; O. P. Modi; A. H. Yegneswaran 📂 Article 📅 1996 🏛 Springer 🌐 English ⚖ 788 KB

Electrodeposition of polyaniline on alum

Electrodeposition of polyaniline on aluminium alloys for corrosion prevention—A study using the wire beam electrode (WBE)

✍ T. Wang; Y.J. Tan 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 522 KB

The removal of copper-phase segregation

The removal of copper-phase segregation and the subsequent improvement in mechanical properties of cast 319 aluminium alloys by a two-stage solution heat treatment

✍ J.H. Sokolowski; X-C. Sun; G. Byczynski; D.O. Northwood; D.E. Penrod; R. Thomas; 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 559 KB

Surface engineering techniques used for

Surface engineering techniques used for improving the mechanical and tribological properties of the Ti6A14V alloy

✍ H. Garbacz; P. Wieciński; M. Ossowski; M.G. Ortore; T. Wierzchoń; K.J. Kurzydłow 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 905 KB

The microstructure, mechanical and tribological properties of composite intermetallic layers of the Ti-Al system were investigated. The layers on the two-phase (α + β) Ti6Al4V titanium alloy were obtained using the hybrid method, which consist of two stages. First, the titanium alloy was covered wit

Influence of the preparation parameters

Influence of the preparation parameters (particle size and aluminium concentration) on the textural properties of Al-pillared clays for a scale-up process

✍ Alberto Sánchez; Mario Montes 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 841 KB