𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Electrochemical properties of sulfonated PEEK used for ion exchange membranes

✍ Scribed by Xianfeng Li; Zhe Wang; Hui Lu; Chengji Zhao; Hui Na; Chun Zhao

Publisher
Elsevier Science
Year
2005
Tongue
English
Weight
297 KB
Volume
254
Category
Article
ISSN
0376-7388

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Sulfonated PEEK-WC membranes for proton-
Sulfonated PEEK-WC membranes for proton-exchange membrane fuel cell: Effect of the increasing level of sulfonation on electrochemical performances
✍ Angelo Basile; Luca Paturzo; Adolfo Iulianelli; Irene Gatto; Enza Passalacqua πŸ“‚ Article πŸ“… 2006 πŸ› Elsevier Science 🌐 English βš– 443 KB

Sulfonation of PEEK-WC powder (a glassy poly-ether ether ketone) has been performed at 80 β€’ C for 3 h using H 2 SO 4 conc. (96%). The degree of sulfonation varied from 15 to 40%, depending on the reaction time. The sulfonated polymers (S-PEEK-WC) were used to prepare dense membranes for possible fue

The Electrochemical Properties of Polysu
The Electrochemical Properties of Polysulfone Ion-Exchange Membranes
✍ M. Ersoz πŸ“‚ Article πŸ“… 2001 πŸ› Elsevier Science 🌐 English βš– 82 KB

The ion-exchange isotherm of sodium and calcium ions and membrane potential measurements of monovalent salts (KCl and NaCl) and monovalent-divalent cation salt mixtures on the polysulfone and polysulfone with polyester support cation exchange membranes have been performed. The equilibrium cation con

Heterogeneous ion-exchange membranes bas
Heterogeneous ion-exchange membranes based on sulfonated poly(1,4-phenylene sulfide) and linear polyethylene: preparation, oxidation stability, methanol permeability and electrochemical properties
✍ Jan Schauer; LibuΕ‘e BroΕΎovΓ‘ πŸ“‚ Article πŸ“… 2005 πŸ› Elsevier Science 🌐 English βš– 224 KB

Poly(1,4-phenylene sulfide) was sulfonated with chlorosulfonic acid in 1,2-dichloroethane. The product (IEC = 2.38 mequiv./g) was ground and sieved (mesh size 63 m) to obtain small particles. The particles and linear polyethylene were mixed in various ratios and the resulting blends were press-molde