๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Electrochemical monitoring of corrosion of steel in microsilica cement pastes

โœ Scribed by C. L. Page; J. Havdahl


Book ID
112756807
Publisher
Springer
Year
1985
Tongue
English
Weight
683 KB
Volume
18
Category
Article
ISSN
1871-6873

No coin nor oath required. For personal study only.


๐Ÿ“œ SIMILAR VOLUMES


Corrosion rates of steel embedded in cem
โœ H.T. Cao; L. Bucea; V. Sirivivatnanon ๐Ÿ“‚ Article ๐Ÿ“… 1993 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 474 KB

Dynamic polarization techniques were used to estimate the corrosion rates of steel embedded in cement paste made with different binder systems. A corrosion model is proposed. The corrosion rates were determined by employing the Evans diagrams constructed from cathodic polarization curve of steel emb

Hardened Portland blast-furnace slag cem
โœ V.K. Gouda; M.A. Shater; R.Sh. Mikhail ๐Ÿ“‚ Article ๐Ÿ“… 1975 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 517 KB

The corrosion behavior of reinforcing steel embedded in various slag cement pastes was studied using the galvanostatic polarization technique. The corrosion resistance is aDnreciably affected by the degree of fineness of the dry slag cement. In Dastes produced from high Blaine area cement, the behav

Effect of uneven porosity distribution i
โœ Ping Gu; Yan Fu; Ping Xie; J.J. Beaudoin ๐Ÿ“‚ Article ๐Ÿ“… 1994 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 871 KB

The influence of heterogeneity of cementitious matrices, e.g. uneven porosity distribution in repair cement paste or mortar, on surface corrosion of the reinforcing steel was investigated using a low frequency impedance technique. Rebar embedded in lower porosity matrices had lower surface impedance

Characterization of surface corrosion of
โœ Ping Gu; Yan Fu; Ping Xie; J.J. Beaudoin ๐Ÿ“‚ Article ๐Ÿ“… 1994 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 662 KB

Surface corrosion of reinforcing steel embedded in cementitious materials containing chloride ion is described by characteristic change of impedance spectra. Phase angle shift, surface impedance and capacitive responses, recorded at very low frequency (100Hz-10mHz), are demonstrated to be very sensi