## Abstract The exfoliation corrosion and electrochemical impedance spectroscopy (EIS) of an Alβ2.8%Cuβ1.5%Liβ0.3%Mgβ0.3%Znβ0.3%Mnβ0.15%Zr alloy with various aging states in EXCO solution were investigated. The equilibrium precipitates at grain boundaries are anodic to the alloy base at their adjac
Electrochemical impedance spectroscopy analysis on aluminum alloys in EXCO solution
β Scribed by F.-H. Cao; Z. Zhang; J.-X. Su; J.-Q. Zhang
- Publisher
- John Wiley and Sons
- Year
- 2005
- Tongue
- German
- Weight
- 212 KB
- Volume
- 56
- Category
- Article
- ISSN
- 0947-5117
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
Electrochemical impedance spectroscopy (EIS) of AlβZnβMgβCu alloy in EXCO solution has been investigated. The results show that the impedance spectroscopy of the investigated electrode consists of two capacitive loops in the high and middle frequency domain respectively and an inductive loop in the low frequency domain at the first 30 h of immersion; the inductive arc disappears between 30 h and 60 h while it takes on at the low frequency domain at the last 36 h of the immersion time. A model based on the corrosion mechanism of the aluminum alloy and corroding morphology was proposed and applied to analyze the EIS results.
π SIMILAR VOLUMES
## Abstract The exfoliation corrosion susceptibility and electrochemical impedance spectroscopy (EIS) of 7150 Al alloys with T6, T73, and RRA (retrogression at 175βΒ°C for 3 h) tempers in EXCO solution were investigated. The anodic equilibrium precipitate __Ξ·__(MgZn~2~) is continuous or closely spac
The initiation and propagation characteristics of the exfoliation corrosion (EC) of 2090-T6 Al-Li alloy in EXCO solution has been studied using electrochemistry impedance spectroscopy (EIS), electrochemical noise (EN), and optical microscope techniques. A four-stage evolution of localized corrosion
## A&r&-Electrochemical impedance data for single crystal Ni( 111) in phosphate buffer solutions of pH 9, 10, and 11 and at potentials spanning the passive range (0.1-0.5 V/see) are interpreted in terms of a point defect model for the passive film in which the kinetics of generation and annihilati