✦ LIBER ✦

Electrochemical generation of ferrate Part I: Dissolution of an iron wool bed anode

✍ Scribed by A. Denvir; D. Pletcher

Publisher: Springer
Year: 1996
Tongue: English
Weight: 772 KB
Volume: 26
Category: Article
ISSN: 0021-891X
DOI: 10.1007/bf00683743

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Electrochemical generation of ferrate Pa

Electrochemical generation of ferrate Part 2: Influence of anode composition

✍ A. Denvir; D. Pletcher 📂 Article 📅 1996 🏛 Springer 🌐 English ⚖ 357 KB

Influence of anode material on current y

Influence of anode material on current yields during ferrate(vi) production by anodic iron dissolution Part I: Current efficiency during anodic dissolution of grey cast iron to ferrate(vi) in concentrated alkali hydroxide solutions

✍ K. Bouzek; I. Roušar 📂 Article 📅 1996 🏛 Springer 🌐 English ⚖ 826 KB

Influence of anode material on current y

Influence of anode material on current yield during ferrate(vi) production by anodic iron dissolution Part II: Current efficiency during anodic dissolution of white cast iron to ferrate(vi) in concentrated alkali hydroxide solutions

✍ K. Bouzek; I. Roušar; M. A. Taylor 📂 Article 📅 1996 🏛 Springer 🌐 English ⚖ 770 KB

The kinetics of Anodic dissolution of ir

The kinetics of Anodic dissolution of iron-chromium alloys in weak acid solutions. Part I. Potentiodynamic and potentostatic investigations

✍ Prof. Dr. sc. nat. I. Garz; Dr.-Ing. U. Blümel; Doz. Dr. sc. techn. H. Worch 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 German ⚖ 631 KB

## Abstract The kinetic of dissolution in the active and prepassive range of FeCrX alloys (X = 4.5; 11.7; 12.7; 13.6; 14.7 and 20.8M%) was investigated in dearated borate solutions (pH 3.5–5.45) and compared with corresponding data for Fe. After cathodic reduction instationary current density‐poten