𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Electrochemical corrosion study of Sn–3Ag–3Cu solder alloy in NaCl solution

✍ Scribed by F. Rosalbino; E. Angelini; G. Zanicchi; R. Carlini; R. Marazza

Publisher
Elsevier Science
Year
2009
Tongue
English
Weight
912 KB
Volume
54
Category
Article
ISSN
0013-4686

No coin nor oath required. For personal study only.

✦ Synopsis

a b s t r a c t

The corrosion behaviour of Sn-3Ag-3Cu (at%) alloy was investigated in 0.1 M NaCl solution by potentiodynamic polarization and impedance spectroscopy measurements and compared with that of the Sn-3Ag-0.5Cu (at%) solder employed in the packaging of some microelectronic components and devices. Scanning electron microscopy (SEM) and electron probe microanalysis (EPMA) were used to characterize the samples prior to and after the electrochemical tests. Results showed that in NaCl solution the corrosion resistance of the Sn-3Ag-3Cu alloy was better than that of the Sn-3Ag-0.5Cu solder. The presence of tin oxychlorides or oxyhydroxychlorides was detected at the surface of both alloys investigated after the electrochemical tests. The better corrosion behaviour of the Sn-3Ag-3Cu alloy compared to the Sn-3Ag-0.5Cu solder can be ascribed to a more adherent and compact corrosion products layer.

📜 SIMILAR VOLUMES

Study on corrosive electrochemical behav
Study on corrosive electrochemical behaviors of zinc-rich and graphite-filled epoxy coatings in 3.5 wt% NaCl solution
✍ J. Liu; F. Wang; K. C. Park 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 German ⚖ 548 KB

## Abstract Environment behaviors and degradation mechanisms of two organic epoxy coatings coated on carbon steel sheets in 3.5 wt% NaCl neutral solution were studied by electrochemical impedance measurements and atomic force microscopy (AFM). The results showed that the coating resistance (R~p~) o

On the Stress corrosion cracking behavio
On the Stress corrosion cracking behaviour of aluminium alloy sheet in an aqueous solution of 3% NaCl + 0.3% H2O2
✍ Dr. R. Braun 📂 Article 📅 1994 🏛 John Wiley and Sons 🌐 German ⚖ 866 KB

## Abstract The stress corrosion cracking (SCC) behaviour of aluminium alloy sheet was investigated in the long transverse direction using the slow strain rate testing technique. The synthetic environment used was an aqueous solution of 3% NaCl + 0.3% H~2~O~2~. No indications of SCC sensitivity are