✦ LIBER ✦

Electrical insulation systems for the ITER Central Solenoid Model Coil

✍ Scribed by Fabian, P.E.; Munshi, N.A.

Book ID: 120255228
Publisher: IEEE
Year: 1999
Tongue: English
Weight: 421 KB
Volume: 9
Category: Article
ISSN: 1051-8223
DOI: 10.1109/77.783375

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Test of the ITER central solenoid model

Test of the ITER central solenoid model coil and CS insert

✍ Martovetsky, N.; Michael, P.; Minervini, J.; Radovinsky, A.; Takayasu, M.; Gung, 📂 Article 📅 2002 🏛 IEEE 🌐 English ⚖ 279 KB

Test Results for the East Central Soleno

Test Results for the East Central Solenoid Model Coil

✍ Liu, H. J.; Liu, X. F.; Liu, F.; Wu, Y.; Liu, B.; Hao, Q. W.; Guo, S. 📂 Article 📅 2013 🏛 IEEE 🌐 English ⚖ 594 KB

Thermal-hydraulic analysis of Tcs measur

Thermal-hydraulic analysis of Tcs measurement in conductor 1A of the ITER Central Solenoid Model Coil using the M&M code

✍ L Savoldi; R Zanino 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 563 KB

We present a ®rst study of current sharing temperature (T cs ) tests performed over the last few months in the Central Solenoid Model Coil (CSMC) experiment at JAERI, Naka, Japan. The CSMC is a superconducting magnet, layer-wound two-in-hand using 18 layers of Nb 3 Sn two-channel cable-in-conduit co

Mechanical behavior of the ITER TF model

Mechanical behavior of the ITER TF model coil ground insulation system after reactor irradiation

✍ K. Bittner-Rohrhofer; K. Humer; H. Fillunger; R.K. Maix; H.W. Weber 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 527 KB

The mechanical properties of glass fiber reinforced plastics (GFRPs) suggested for the turn and ground insulation of the ITER toroidal field (TF) coils are subject to extensive investigations with respect to their design requirements at present. The insulation system used for the ITER TF model coil,

Low-temperature tensile strength of the

Low-temperature tensile strength of the ITER-TF model coil insulation system after reactor irradiation

✍ K Bittner-Rohrhofer; K Humer; H.W Weber 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 669 KB

The windings of the superconducting magnet coils for the ITER-FEAT fusion device are affected by high mechanical stresses at cryogenic temperatures and by a radiation environment, which impose certain constraints especially on the insulating materials. A glass fiber reinforced plastic (GFRP) laminat

Modeling tools for the ITER Central Inte

Modeling tools for the ITER Central Interlock System

✍ A.Vergara Fernández; G. Ambrosino; G. Carannante; G. De Tommasi; L. Scibile 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 249 KB