✦ LIBER ✦

Electrical and mechanical behaviour of improved platinum on ceramic bolometers

✍ Scribed by M. Gonzalez; E.R. Hodgson

Book ID: 108136985
Publisher: Elsevier Science
Year: 2007
Tongue: English
Weight: 957 KB
Volume: 82
Category: Article
ISSN: 0920-3796
DOI: 10.1016/j.fusengdes.2007.01.027

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of SrO additive on the electrical

Effect of SrO additive on the electrical and dielectric behaviour of hot-pressed AlN ceramic

✍ K. K. Srivastava; M. Zulfequar; A. Kumar 📂 Article 📅 1989 🏛 Springer 🌐 English ⚖ 338 KB

Dependence of PtSi Schottky diode electr

Dependence of PtSi Schottky diode electrical behaviour on the platinum film thickness and on the annealing process

✍ F. La Via; P. Lanza; O. Viscuso; G. Ferla; E. Rimini 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 432 KB

On the correlation between mechanical da

On the correlation between mechanical damage and the electrical properties of zirconia ceramics

✍ Azita Khalili; Karl Kromp 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 840 KB

Mechanical and electrical properties of

Mechanical and electrical properties of Sc2O3-doped zirconia ceramics improved by postsintering with HIP

✍ Masanori Hirano; Michio Inagaki; Yasunobu Mizutani; Kazuhiro Nomura; Masayuki Ka 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 459 KB

Influence of microcracking and homogenei

Influence of microcracking and homogeneity on the mechanical behaviour of (Al2O3+ ZrO2) ceramics

✍ A. Krell; P. Blank; T. Weiss 📂 Article 📅 1987 🏛 Springer 🌐 English ⚖ 734 KB

Effect of the cooling rate on the mechan

Effect of the cooling rate on the mechanical and electrical behaviour of a 63Sn/37Pb solder bump on a metallized Si substrate

✍ Bi-Shiou Chiou; Jen-Chiun Cheng 📂 Article 📅 1994 🏛 Springer US 🌐 English ⚖ 497 KB

Flip-chip bonding technology, with solder bumps deposited on metal terminals on the chip, provides the highest functional densities of all the present bonding techniques. In this study, tin-lead solder bumps were screen printed onto a metallized Si substrate. Various cooling rates were employed afte